| COMPONENT |
PASS |
FAIL |
| FIELD
STRIPPED EXAM |
|
|
| A. Barrel |
|
|
| 1. Barrel bulged |
|
|
| 2. Cracks at muzzle |
|
|
| 3. Longitudinal cracks |
|
|
| 4. Condition of lugs |
|
|
| B. Slide |
|
|
| 1. Sights-nights sights inspection |
|
|
| 2. Front sight pin/screw present |
|
|
| 3. Grooves (condition of) |
|
|
| 4. Guide ring |
|
|
| 5. Cracks, especially under ejection port |
|
|
| 6. Slide "stop" notch |
|
|
| 7. Brass deposits (excessive?) |
|
|
| 8. Extractor clearance |
|
|
| C. Receiver |
|
|
| 1. Magazine catch |
|
|
| 2. Receiver cracked |
|
|
| 3. Slide stop lever tension |
|
|
| 4. Correct ejection |
|
|
| 5. Condition of rails |
|
|
| 6. Slide lock (up & to the rear) |
|
|
| D. Recoil spring assembly |
|
|
| DETAIL
STRIPPED EXAM |
|
|
| A. Slide cover plate |
|
|
| B. Firing pin assembly |
|
|
| 1. Upgrade present |
|
|
| 2. Correct firing pin |
|
|
| 3. Nose chipped or broken |
|
|
| 4. Firing pin spring cups |
|
|
| 5. Firing pin spring |
|
|
| 6. Spacer sleeve |
|
|
| 7. Firing pin channel liner |
|
|
| C. Extractor depressor
plunger assembly |
|
|
| 1. Spring straight and undamaged |
|
|
| 2. Correct spring loaded bearing |
|
|
| D. Extractor |
|
|
| 1. Upgrade present |
|
|
| 2. Condition of extractor |
|
|
| E. Firing pin safety |
|
|
| 1. Upgrade present |
|
|
| 2. Firing pin safety spring in place |
|
|
| 3. Firing pin safety tests |
|
|
| F. Locking block pin |
|
|
| G. Trigger pin |
|
|
| H. Locking block |
|
|
| I. Trigger spring -
installed correctly |
|
|
| 1. With proper connector |
|
|
| J. Trigger and trigger bar |
|
|
| 1. Correct for the gun |
|
|
| 2. Unusual wear |
|
|
| 3. Trigger safety functional |
|
|
| K. Trigger mechanism
housing |
|
|
| 1. Ejector condition |
|
|
| 2. Connector Tight |
|
|
| L. Magazine |
|
|
| 1. Tube-lips damaged |
|
|
| 2. Spring right for gun - undamaged |
|
|
| 3. Follower cracked or broken |
|
|
| 4. Correct for gun |
|
|
